Here below the last updates for 2023 .

This is a summarizing that can help to find out the common use resources .

Same files could be get from download area too .

Schematic draws : https://www.mectronik.info/download/next-gen-schematic-draws/

Supersport wiring loom are free , but schematic draw and connection to laptop for technical check must be respected .

CAN Protocols : https://www.mectronik.info/download/next-gen-can-protocols/

The 2 different CAN protocols could be used ( must be selected from MECAL ) , the SS21 compatible and the NG22 . Last one is optimized for frequency and BUS load . So if it’s possible We strongly advise to use the NG22 .

Manufacturer Maps : https://www.mectronik.info/download/wss-rules-table/

The Manufacturers MAP must be homologated , different national championships could have different rules , so please be sure to always use an valid manufacturer map .

Workspace ZIP : https://www.mectronik.com/public/workspaces/WSSNG.zip

The published WORKSPACE contains ever last firmware , homologated maps , base strategy maps , this could be installed directly form MECAL , but if You just need to get last files , here You have a ZIP with full content .