Last updates :
- new DIS map for Yamaha R6 ( for WSS , NOT COMPULSORY , new RPM Limiter )
- new DIS map for Yamaha R3 ( for WSS 300 , DIS file )
Previous updates :
- new DIS map for Yamaha R6 ( for WSS , map ID 93 conversion from previous ID 34 )
- new firmware 2.27.41 ( for all championship , NOT COMPULSORY )
- new DIS map for QJ Motor ( for WSS )
- new DIS map for DUCATI Panigale V2 ARROW exhaust ( for WSS )
- new DIS map for Kawasaki ZX6R ( for WSS , Akrapovich exhaust )
- new DIS map for DUCATI Panigale V2 ( for WSS ) compulsory from Round 6 ( MOST )
- new firmware 2.27.40 ( for all championship )
- new DIS map for Yamaha R6 ( for WSS )
- new DIS map for Triumph 765 ( for WSS )
See below for details .
This page is a reference common for all championships that use our ECUs as single unit for control the Balance Of Performance .
Here you can find clear to consult and ever updated table for approved firmware and maps .
For national championship you should check on technical rules documents what rules you must follow .
Actually there are 3 big families :
1) World Championship
2) British championship
3) Motoamerica
Other national championships follow the rules defined on one of it .
Technical inspection can be looking to the DashBoard ( only for SoloEngineering device ) , or with a software in use to championships marshal . They can connect to Your motorbike , reading informations related to hardware / firmware / calibration . They can’t made changes to Your calibration , so don’t worry about it , nothing wrong can happens .
We just released some updates as workspace that You can download and install directly from inside MECAL , If You are not familiar with the workspace procedure , here You can find some detailed instruction .
If You already have the workspace installed and need just to update it , You can download last released MAPS from following link :
Championship | Rule Table | Manufacturer Maps |
World Supersport | WSS_TABLE | WSS_DIS ( include last XLIB ) |
British Supersport | BSB_TABLE | BSB_DIS ( include last XLIB ) |
Moto America | MA_TABLE | MA_DIS ( include last XLIB ) |
NOTES
Can Protocol 2024 : https://www.mectronik.info/docs/updates/NG_2024/NextGeneration_CAN_Protocol_NG24_V1.5.zip
Schematic draws : https://www.mectronik.info/download/next-gen-schematic-draws/